1. Everyday operator should clean machine before start any task.2. Have to check laser machines air pressure.
3. When starting a machine, fill water in the water tank and examine the work condition of circulation pump after set temperature 22c – 23c.
9. Once, face any trouble in laser machine first turn off the appliance to erase a significant loss.
10. Don’t operate without guards in place, Lock out electrical power before servicing. Severe personal injury or death could result.
11. Forbidden to cut ePTFE fabric (Gore-Tex etc.), use sonic jig cutter or knife.
12. Class 4 laser products: Be aware of laser radiation, please protect your eyes or skin from any direct or scatter ray or invisible laser radiation.
13. When switching on the power, please close the cover to erase any unexpected incident from being burnt by the laser.
14. Before starting any cutting task, have to review fabric nature, pattern, consumption, and original sample etc. to be safe.
15. Crevice may cause physical damage, don’t put your hand in the gap on the table.
16. Don’t alert reflectors at will; it may cause an accident.
17. When laser machine is in working condition, it’s forbidden to leave the machine alone and be cautious to the fire.
18. Routine wise monthly check the whole laser machine by the maintenance department.
You may like: Factors have to consider before setting up garment business in small scale
Leave a Reply
You must be logged in to post a comment.